HDMI vs. Component – What is the best for HDTV?
HDMI vs. Component – What is the best for HDTV?
I see the question “What is better HDMI or component video for HDTV?” Asked several times in offices and elsewhere in the network. The answer to this question is “Well, it depends.” Before reading, in my opinion is better, I have to give a brief description of each.
HDMI is a pure digital signal as DVI with one exception. HDMI also carries digital audio cable itself. HDMI and DVI will give you a 100% exact copy of the original video. This is similar to the way in which the computer sends a file on the Internet at high speed in a purge (or digital).
While it is HDTV quality component video is analog, not digital. However, this is not necessarily a bad thing, as we shall see later in this article. Component video is compossed three separate RCA cables consisting of a luminance ( “Y” channel or “green”, which represents the overall brightness of the image), less bright red (Pr “” or “Red”, channel), and luminance less blue (the “lead” or “Blue”, cable) channel. Audo is also divided into two RCA cables usually colored red and white.
HDMI and component video output up to 1080p HDTV. This means that both are extremely well adapted to all types of devices in high definition. And most people will not notice the difference between the two, while maintaining a pure HDTV video signal.
So what is the best? Depends on the type of device you want to display the video signal and how the device converts the display from analog to digital. It also depends on your TV. This is a pure digital display like an LCD or a CRT screen as an analog.
Suppose you have an LCD display. This is a digital camera so pure common sense would say that HDMI is the best choice and, normally, this is certainly correct. However, if the output device has high-level image might have added digital artifacts that are displayed on your digital camera clean. For example, if you have a low-end upscaling DVD player you can see artifacts such as Blur more pixels, so that when viewing through HDMI on the large LCD screen. If this is the case then it might be better if you use component 480p and let your TV LCD upper limit to the scale bigger.
HDMI is more suitable, when both input and output devices are purely digital. A good example would be a computer or game console luxury. HDMI will give you a clearer picture of the Crips over the component. However, once again most people probably do not even notice it.
My opinion is that if the output device has both connections Try both and see for yourself that looks best for you. If your new digital camera, you probably prefer the first component, because you can see artifacts in signals of lower quality, like 480th analogue transmissions. Component tends to mask some of these artifacts as a function of how technology from analog to digital upscaling the output device is.
Another thing to consider is the length of cable you need. HDMI tends to require short distance in which the component cables can usually be very long. Component video is analog, can pick up interference, but unless the cable is of poor quality, is usually not a problem.



